The Sketcher 1. You can use the Trim to Closest option of the Trim Entities tool to extend sketch entities.
2. Which of the following is NOT a type of arc in SOLIDWORKS?
3. One way to remove an existing sketch entity is to select it and then press the __________ key on the keyboard.
4. To select multiple sketch entities, press and hold down the __________ key on the keyboard while selecting multiple entities.
5. This is a test
Sketched Features 6. The Extruded Boss feature can be used to remove material.
7. You can bring up the dimensions used to define a feature by double-clicking on a face of that feature.
8. Which end condition from the Cut-Extrude Property manager is used to cut the entire part?
9. Unlike the Extruded Boss, the Sweep feature does not give you the option to create a Thin Feature.
10. Which end condition of an Extruded Boss is used to add an equal amount of material to both sides of the sketch plane?
Applied Features 11. The only way to create a reference plane is by offsetting it from an existing face or plane.
12. A Shell Feature can only be used to create shells with a uniform thickness. Any walls that you want to give different thicknesses to will need to have material added or removed afterward.
13. Materials in the Material Library are defined by data such as Density and Yield Strength.
14. You can select a planar face as the reference plane for mirroring a feature.
15. When you select multiple edges to Chamfer, a flag is displayed on each edge and each one can be given individual Chamfer dimensions.
Parts 16. While creating a design table you are prompted to select which dimensions you want to control in the Design Table.
17. When modifying a feature, you can specify which configuration you want the feature to apply to.
18. When modifying a dimension, you can specify which configuration(s) you want the modified dimension to apply to.
19. You can double-click a feature in the graphics area to display its dimensions.
20. To suppress a feature, you can right-click on it in the FeatureManager Tree or in the Graphics Area, then click on Suppress in the pop-up menu.
Assemblies 21. When creating an Exploded View, you can move multiple components at the same time in a single step.
22. You can insert a component into an assembly by dragging the .SLDPRT part file from Windows Explorer into the SOLIDWORKS window and dropping it in your assembly.
23. You cannot flip the alignment of a Coincident mate from the Mates PropertyManager.
24. The (f) in front of the first component listed in the Feature Manager Tree indicates:
25. You can apply a Tangent Mate between two flat faces.
Views 26. When measuring Runout, your dieal indicator is set on the part and shows an initial reading of +0.15. As you rotate the part, the dial goes up to +0.25 and down to -0.2. What would be the amount of Runout error in the part?
27. Magnetic Lines can also be added easily with Auto-Balloon.
28. What is the shape of the Concentricity tolerance zone?
29. What allows Positions to be more accurately measured than normal coordinate dimensions?
30. Which of the following statements is FALSE about Runout tolerances?
Dimensions, Etc. 31. If there are concentric circles, then it is recommended that you apply the center mark to the ______ circle.
32. With the Note Command active, when you roll the cursor over the model, a leader line will appear.
33. You can not add tolerances or notes to driven dimensions.
34. To save a Custom Sheet Format you should choose ______ from the File Drop Down Menu.
35. If you delete a driving dimension from a drawing view, the dimension will also be deleted from the model.
Advanced Parts 36. The Split feature can be used to ______.
37. Any areas that are _________ will be affected by the flex feature.
38. Setback Parameters can only be applied to Variable Radius Fillets.
39. __________ faces are those that have both positive and negative draft.
40. The following property manager is found in __________.
41. What type of geometry can be used to create lofts: (A) sketches, (B) surfaces, (C) model faces, or (D) points.
42. Which surfacing feature is used to push and pull on a surface to create the surface shown?
Advanced Assemblies 43. Smart Components can be used to add ______ data to a part when adding it to an assembly.
44. Using SOLIDWORKS Explorer, you can determine what assembly a part file is used in by going to:
45. External references are a side effect of creating:
46. The Limit Mate allows you to set limits on what type of motion?
47. If a change is made to a mirrored component at the assembly level, both the original and the mirrored component will have that same change.
48. What are some ways to diagnose mate errors?
49. When creating a new configuration, you always have to give it a unique name, description, and comment.
Sheet Metal 50. Which of the following is not a valid sheet metal Corner Treatment?
51. The first step in creating a new sheet metal part is to create an Edge Flange.
52. Sheet Metal Cuts can be found in the...
53. You can use the sheet metal Corner Trim option to change the part in both its flattened and folded state.
54. When creating a sketch for a sheet metal Base Flange, it`s important to break off any sharp corners with sketch fillets.
55. When creating multiple Edge Flanges, which statement is true regarding the arrows that control the direction and the length?
56. You can convert SolidBody parts to sheet metal.
SimulationXpress 57. You can use SimulationXpress to perform an analysis on a part with a custom material.
58. Which of the following is a valid load type in SimulationXpress?
59. How many dimensions can be optimized using SimulationXpress?
60. What type of materials does SimulationXpress work with?
61. If you have a book shelf that you plan to put 25 lbs on, but the shelf will actually hold 100 lbs before it breaks, the shelf would have a factor of safety of:
