The Sketcher 1. This is a test
2. If the position of the original point in the figure below is changed, the mirrored point will remain in the same spot.
3. When you select a face to use as the sketch plane, any sketch entities extending beyond the boundaries of that face will result in an error.
4. To select multiple sketch entities, press and hold down the __________ key on the keyboard while selecting multiple entities.
5. If a geometric entity or a dimension is displayed in red, this implies that it is:
Sketched Features 6. The Extruded Boss feature can be used to remove material.
7. When creating a Thin Feature, you can define different thicknesses for the two sides of the thin feature extrusion plane.
8. Which of the following features is an applied feature, meaning that it is not defined by one or more sketches?
9. What is the minimum number of sketches needed to create a simple Sweep feature?
10. Which option needs to be selected from the Revolve Type drop-down list to revolve the sketch symmetrically on both sides of the sketching plane?
Applied Features 11. Which check box is selected to make sure that only the original hole is patterned in the second direction and not the patterned holes?
12. True or False: A Chamfer can be applied to an edge, face, or vertex.
13. When you select multiple edges to Chamfer, a flag is displayed on each edge and each one can be given individual Chamfer dimensions.
14. A Shell Feature can only be used to create shells with a uniform thickness. Any walls that you want to give different thicknesses to will need to have material added or removed afterward.
15. It is possible to add material to a part using a Chamfer feature.
Parts 16. You can double-click a feature in the graphics area to display its dimensions.
17. Using the __________ option, you can change the state of a model back to where a particular feature or features weren`t yet created.
18. After you create a design table, an Excel icon is displayed in the ConfigurationManager Tree which implies that the design table is driving the configuration.
19. Suppressing a feature is equivalent to deleting the feature.
20. You can manage the sizes of features in different configurations using a design table.
Assemblies 21. Which of the following is available for Assembly files but not for Part files?
22. The (f) in front of the first component listed in the Feature Manager Tree indicates:
23. You cannot flip the alignment of a Coincident mate from the Mates PropertyManager.
24. You can apply the Tangent Mate between a flat face and a sphere.
25. You can apply a coincident mate between two edges.
Views 26. When is Position used?
27. When selecting a datum axis with a Runout control, which of the following is allowed?
28. What is "True Position"?
29. Which of the following features easily allows you to combine two or more sketches into a single curve?
30. What is controlled within the tolerance zone for Concentricity?
Dimensions, Etc. 31. If there are concentric circles, then it is recommended that you apply the center mark to the ______ circle.
32. You can modify a driven dimension and the part geometry will also be modified.
33. When applying an ordinate dimension you need to first specify a zero reference.
34. If you have created and saved a drawing template in the default Tutorial folder, then that template will be displayed in the Tutorials tab of the New SOLIDWORKS Document dialog box.
35. A Bill of Materials can only be created in the drawings of part files.
Advanced Parts 36. When using the Flex Feature, Twisting will always occur about:
37. Draft analysis is used to determine whether or not a design can be ejected from the mold.
38. In a draft analysis a straddle face is a face that:
39. Setback Parameters can only be applied to Variable Radius Fillets.
40. These types of surfaces define the face where the core and cavity blocks will touch.
41. Changes made to the original sketch will also be made to the derived sketch .
42. The Indent Feature can only be used in multibody parts.
Advanced Assemblies 43. When you create a new assembly configuration, what section in the Add Configuration Property Manager can be used to also create a new configuration in part files of the assembly?
44. SOLIDWORKS sets sub-assemblies to be rigid by default. This means __________.
45. Deleting component folders will also delete the components.
46. Smart Components can be used to add ______ data to a part when adding it to an assembly.
47. What are some ways to diagnose mate errors?
48. What mate should be used to simulate the movement of a pulley?
49. If changes are made at the part level to a component in a pattern feature, such as an added Cut-Extrude feature, all of the other components in the pattern will also have that same change.
Sheet Metal 50. The sheet metal Hem tool _________.
51. The Rip feature is generally used to ________.
52. You can use the Edge Flange feature to add material to sheet metal cones and cylinders.
53. Sheet Metal Cuts can be found in the...
54. You can convert SolidBody parts to sheet metal.
55. You can use the sheet metal Corner Trim option to change the part in both its flattened and folded state.
56. When creating a sketch for a sheet metal Base Flange, it`s important to break off any sharp corners with sketch fillets.
SimulationXpress 57. Which of the following is a valid load type in SimulationXpress?
58. Even if you`ve already defined a part`s material in SOLIDWORKS, you can specify a different material in SimulationXpress.
59. You can use SimulationXpress to perform an analysis on a part with a custom material.
60. You CANNOT use SimulationXpress to help optimize a part based on _______________.
61. SimulationXpress results can be exported as __________.
