The Sketcher 1. If a geometric entity or a dimension is displayed in red, this implies that it is:
2. Which of the following sketch tools does not require one or more existing sketch entities?
3. If the position of the original point in the figure below is changed, the mirrored point will remain in the same spot.
4. The Power Trim option can be used to trim sketched geometry by clicking and dragging the mouse cursor through sketch segments that you want to trim away.
5. When you select a face to use as the sketch plane, any sketch entities extending beyond the boundaries of that face will result in an error.
Sketched Features 6. A loft feature can be created from a single 3D sketch.
7. Which option within the Loft PropertyManager is used to control the tangency between the sketch profiles?
8. Which end condition from the Cut-Extrude Property manager is used to cut the entire part?
9. Unlike the Extruded Boss, the Sweep feature does not give you the option to create a Thin Feature.
10. Which of the following features is an applied feature, meaning that it is not defined by one or more sketches?
Applied Features 11. A Shell Feature can only be used to create shells with a uniform thickness. Any walls that you want to give different thicknesses to will need to have material added or removed afterward.
12. Faces, edges, features, and loops can all be selected to add to the Fillet PropertyManager selection box.
13. Which of the following keys is a standard shortcut for the Zoom to Fit tool?
14. Which check box is selected to make sure that only the original hole is patterned in the second direction and not the patterned holes?
15. The only way to create a reference plane is by offsetting it from an existing face or plane.
Parts 16. When you create a design table, the toolbars are changed and an embedded Excel application is started.
17. After you create a design table, an Excel icon is displayed in the ConfigurationManager Tree which implies that the design table is driving the configuration.
18. You can double-click a feature in the graphics area to display its dimensions.
19. When modifying a dimension, you can specify which configuration(s) you want the modified dimension to apply to.
20. After an extruded feature has been created, you can always go back and edit the feature. When you edit an existing extrude feature, which of the following cannot be changed from the Extrude PropertyManager?
Assemblies 21. You cannot apply mates between the face of a model and a reference plane.
22. The (f) in front of the first component listed in the Feature Manager Tree indicates:
23. You can insert a component into an assembly by dragging the .SLDPRT part file from Windows Explorer into the SOLIDWORKS window and dropping it in your assembly.
24. You can apply the Tangent Mate between a flat face and a sphere.
25. You can apply a Tangent Mate between two flat faces.
Views 26. When do the Curves Influence selection boxes appear?
27. The Projected Curve feature has 2 options, which of the following pairs is correct? A) Sketch on Faces B) Sketch on Edge C) Sketch on Sketch D) Sketch on Point
28. Even if you`ve applied a custom scale to a drawing view, changing the scale of the entire sheet still modify the scale of that drawing view.
29. The main reason to use Total Runout over Runout would be to control the taper along the axial direction of the part.
30. Which of the following features easily allows you to combine two or more sketches into a single curve?
Dimensions, Etc. 31. If you have created and saved a drawing template in the default Tutorial folder, then that template will be displayed in the Tutorials tab of the New SOLIDWORKS Document dialog box.
32. When you attach a balloon to a face, it is attached with an arrow.
33. You can modify a driven dimension and the part geometry will also be modified.
34. To save a Custom Sheet Format you should choose ______ from the File Drop Down Menu.
35. Baseline dimensions always move in groups, meaning that if you move one dimension, then all the dimensions in the group are moved.
Advanced Parts 36. In a draft analysis a straddle face is a face that:
37. When the path and guide curve have different lengths, the sweep will have the length of...
38. Shut off surfaces are necessary when the part being molded has openings and/or windows.
39. A snap groove must be created after its corresponding snap hook has already been created.
40. These types of surfaces define the face where the core and cavity blocks will touch.
41. Occluded undercuts are parts that cannot be molded without the use of __________.
42. To create a lip/groove feature while working with an assembly, SOLIDWORKS must be in the edit part mode.
Advanced Assemblies 43. When creating a new configuration, you always have to give it a unique name, description, and comment.
44. You cannot make changes at the part level while working in an assembly.
45. If a change is made to a mirrored component at the assembly level, both the original and the mirrored component will have that same change.
46. Using SOLIDWORKS Explorer, you can determine what assembly a part file is used in by going to:
47. External references are a side effect of creating:
48. Deleting component folders will also delete the components.
49. The Limit Mate allows you to set limits on what type of motion?
Sheet Metal 50. The Rip feature is generally used to ________.
51. You can use the sheet metal Corner Trim option to change the part in both its flattened and folded state.
52. You can convert SolidBody parts to sheet metal.
53. In order to select multiple edges for an Edge Flange they must be in contact.
54. When creating a sketch for a sheet metal Base Flange, it`s important to break off any sharp corners with sketch fillets.
55. The sketch used for a Sketched Bend or Jog does not have to cross the entire surface.
56. You can use the Edge Flange feature to add material to sheet metal cones and cylinders.
SimulationXpress 57. You can apply loads to ____________ in SimulationXpress.
58. If you have a book shelf that you plan to put 25 lbs on, but the shelf will actually hold 100 lbs before it breaks, the shelf would have a factor of safety of:
59. SimulationXpress results can be exported as __________.
60. If you use a 4000lbs load, choose the Per Item option, and select two faces to apply the load, SimulationXpress applies a total load of 8000lbs.
61. How many dimensions can be optimized using SimulationXpress?
