The Sketcher 1. Which of the following sketch tools does not require one or more existing sketch entities?
2. While in sketch mode, the number displayed to the right of the cursor defines the sketch element`s exact size. Therefore, there is no need to add a dimension to set the dimensional value.
3. If a geometric entity or a dimension is displayed in red, this implies that it is:
4. In order to create two-dimensional geometry such as lines, arcs, and rectangles, what mode should SOLIDWORKS be in?
5. You can fully define the shape and size of a sketch using only dimensions and geometric relations.
Sketched Features 6. Which end condition of an Extruded Boss is used to add an equal amount of material to both sides of the sketch plane?
7. A loft feature can be created from a single 3D sketch.
8. You can bring up the dimensions used to define a feature by double-clicking on a face of that feature.
9. What is the minimum number of sketches needed to create a simple Sweep feature?
10. Which of the following features is an applied feature, meaning that it is not defined by one or more sketches?
Applied Features 11. When using the Hole Wizard feature, it is only possible to create one hole.
12. What can be used as the Pattern Axis for a Circular Pattern?
13. Components are the building blocks of parts.
14. The keyboard shortcut CTRL+Shift+Z can be used to return to the previous view of the model.
15. Faces, edges, features, and loops can all be selected to add to the Fillet PropertyManager selection box.
Parts 16. To suppress a feature, you can right-click on it in the FeatureManager Tree or in the Graphics Area, then click on Suppress in the pop-up menu.
17. You can manage the sizes of features in different configurations using a design table.
18. Using the __________ option, you can change the state of a model back to where a particular feature or features weren`t yet created.
19. When you create a design table, the toolbars are changed and an embedded Excel application is started.
20. When modifying a feature, you can specify which configuration you want the feature to apply to.
Assemblies 21. You cannot flip the alignment of a Coincident mate from the Mates PropertyManager.
22. You can use the __________ key from the keyboard to flip the alignment of a mate while creating a smart mate.
23. Which of the following is available for Assembly files but not for Part files?
24. You can apply a Tangent Mate between two flat faces.
25. You can insert a component into an assembly by dragging the .SLDPRT part file from Windows Explorer into the SOLIDWORKS window and dropping it in your assembly.
Views 26. What is the tolerance zone for Profile of a Line?
27. Baseline dimensions reference a model`s dimensions using a point or line to establish the first dimension and all values thereafter are measured from the end line of the previous dimension.
28. If you move a section view after it has been created, the section view`s alignment with the parent view will be broken.
29. When creating a sweep, a ____ is necessary, which can include 2D sketches, existing model edges, and curves.
30. Position does not require basic dimensions to locate the controlled feature
Dimensions, Etc. 31. If you delete a driving dimension from a drawing view, the dimension will also be deleted from the model.
32. If you have created and saved a drawing template in the default Tutorial folder, then that template will be displayed in the Tutorials tab of the New SOLIDWORKS Document dialog box.
33. If there are concentric circles, then it is recommended that you apply the center mark to the ______ circle.
34. When applying an ordinate dimension you need to first specify a zero reference.
35. When you attach a balloon to an edge, it is attached with an arrow.
Advanced Parts 36. Which display is present on the freeform surface below?
37. When using the Flex Feature, Twisting will always occur about:
38. Control Points for Variable Radius Fillets can be adjusted by the Radius and ______ settings.
39. To change the orientation of the Trim Planes or Axes you must right click_______.
40. The order in which the snap hook and snap groove are created does not matter.
41. What type of geometry can be used to create lofts: (A) sketches, (B) surfaces, (C) model faces, or (D) points.
42. When using the scale tool with `Uniform scaling`, a scale factor of 2 makes the mass and volume of a part twice as large as the original mass and volume.
Advanced Assemblies 43. If a change is made to a mirrored component at the assembly level, both the original and the mirrored component will have that same change.
44. Using SOLIDWORKS Explorer, you can determine what assembly a part file is used in by going to:
45. You cannot make changes at the part level while working in an assembly.
46. SOLIDWORKS sets sub-assemblies to be rigid by default. This means __________.
47. The `In Place` mate is...
48. The main purpose for using assembly Design Tables is to...
49. Deleting component folders will also delete the components.
Sheet Metal 50. The Corner Trim feature can only be used on the flat pattern of a sheet metal part.
51. When creating multiple Edge Flanges, which statement is true regarding the arrows that control the direction and the length?
52. Which of the following is not a valid sheet metal Corner Treatment?
53. The Rip feature is generally used to ________.
54. When creating a sketch for a sheet metal Base Flange, it`s important to break off any sharp corners with sketch fillets.
55. In order to add a Jog to a sheet metal part, you must create a sketch.
56. You can use the Edge Flange feature to add material to sheet metal cones and cylinders.
SimulationXpress 57. You can apply __________ restraints or fixtures in SimulationXpress.
58. Which of the following is NOT a valid SimulationXpress result?
59. You CANNOT use SimulationXpress to help optimize a part based on _______________.
60. You can use SimulationXpress to analyze the motion of an assembly.
61. If you use a 4000lbs load, choose the Per Item option, and select two faces to apply the load, SimulationXpress applies a total load of 8000lbs.
