The Sketcher 1. Which of the following is NOT a type of arc in SOLIDWORKS?
2. While sketching a __________, you can switch directly to the Arc tool without clicking the Arc tool icon.
3. Which of the following sketch tools does not require one or more existing sketch entities?
4. This is a test
5. The Power Trim tool can be used to extend a line to a target point.
Sketched Features 6. When creating a Thin Feature, you can define different thicknesses for the two sides of the thin feature extrusion plane.
7. You can bring up the dimensions used to define a feature by double-clicking on a face of that feature.
8. Which end condition from the Cut-Extrude Property manager is used to cut the entire part?
9. A loft feature can be created from a single 3D sketch.
10. The Extruded Boss feature can be used to remove material.
Applied Features 11. When creating a Fillet, the Tangent Propagation option ensures that the Fillet is applied to all edges that are tangent to a selected edge.
12. You can select a planar face as the reference plane for mirroring a feature.
13. Features that do not need to be defined and created with sketches are known as ________ features.
14. Faces, edges, features, and loops can all be selected to add to the Fillet PropertyManager selection box.
15. The only way to create a reference plane is by offsetting it from an existing face or plane.
Parts 16. When you create a design table, the toolbars are changed and an embedded Excel application is started.
17. Using the __________ option, you can change the state of a model back to where a particular feature or features weren`t yet created.
18. You can manage the sizes of features in different configurations using a design table.
19. To suppress a feature, you can right-click on it in the FeatureManager Tree or in the Graphics Area, then click on Suppress in the pop-up menu.
20. Configurations you want to control with a design table must be defined before creating the design table.
Assemblies 21. The (f) in front of the first component listed in the Feature Manager Tree indicates:
22. You can apply a Tangent Mate between a flat face and a cylindrical face.
23. You can use the __________ key from the keyboard to flip the alignment of a mate while creating a smart mate.
24. You can apply a Tangent Mate between two flat faces.
25. You cannot flip the alignment of a Coincident mate from the Mates PropertyManager.
Views 26. Which one of the following statements is not correct about Balloons?
27. If you move a section view after it has been created, the section view`s alignment with the parent view will be broken.
28. A Bill of Materials created in a drawing cannot be exported as an excel document.
29. When do the Curves Influence selection boxes appear?
30. Which of the following statements is FALSE for profile?
Dimensions, Etc. 31. You can modify a driven dimension and the part geometry will also be modified.
32. You can only use the default configuration of an assembly to drive a Bill of Materials.
33. If there are concentric circles, then it is recommended that you apply the center mark to the ______ circle.
34. When you attach a balloon to an edge, it is attached with an arrow.
35. To save a Custom Sheet Format you should choose ______ from the File Drop Down Menu.
Advanced Parts 36. When using the Flex Feature, Twisting will always occur about:
37. To change the orientation of the Trim Planes or Axes you must right click_______.
38. Which of the following is the final step in creating a mold?
39. The order in which the snap hook and snap groove are created does not matter.
40. A Mounting Boss fastening feature can be positioned using...
41. When using the scale tool with `Uniform scaling`, a scale factor of 2 makes the mass and volume of a part twice as large as the original mass and volume.
42. Changes made to the original sketch will also be made to the derived sketch .
Advanced Assemblies 43. The `In Place` mate is...
44. If a change is made to a mirrored component at the assembly level, both the original and the mirrored component will have that same change.
45. Assembly Features cannot be propagated to the individual part files of the components in which they affect.
46. SOLIDWORKS sets sub-assemblies to be rigid by default. This means __________.
47. When creating a new configuration, you always have to give it a unique name, description, and comment.
48. You cannot make changes at the part level while working in an assembly.
49. Deleting component folders will also delete the components.
Sheet Metal 50. Which of the following is not a valid sheet metal Corner Treatment?
51. You can use the Edge Flange feature to add material to sheet metal cones and cylinders.
52. The sketch used for a Sketched Bend or Jog does not have to cross the entire surface.
53. In SOLIDWORKS, sheet metal bend tables are compatible with what type of file?
54. Multiple Edge Flanges can be created in the same feature.
55. The Rip feature is generally used to ________.
56. You can convert SolidBody parts to sheet metal.
SimulationXpress 57. SimulationXpress can optimize a dimension with respect to:
58. You can apply __________ restraints or fixtures in SimulationXpress.
59. You can use SimulationXpress to analyze the motion of an assembly.
60. Even if you`ve already defined a part`s material in SOLIDWORKS, you can specify a different material in SimulationXpress.
61. Which of the following is NOT a valid SimulationXpress result?
